|
Design for Industrial Application
Ø High-powered industrial cellular module
Ø High-powered industrial 32bits CPU
Ø Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional)
Ø Housing: iron, providing IP30 protection.
Ø Power range：DC 12~35V
Stability and Reliability
Ø Support hard ware and software WDT
Ø Support auto recovery mechanism, including online detect, auto redial when offline to make router always online
Ø Ethernet port: 1.5KV magnetic isolation protection
Ø RS232 port: 1.5KV ESD protection
Ø SIM/UIM port: 1.5KV ESD protection
Ø Power port: reverse-voltage and overvoltage protection
Ø Antenna port: lightning protection (optional)
Standard and Convenience
Ø Support standard RS232、Ethernet and WIFI port that can connect to serial, Ethernet and WIFI devices directly
Ø Support standard WAN port and PPPOE protocol that can connect to ADSL directly
Ø Support intellectual mode, enter into communication state automatically when powered
Ø Provide management software for remote management
Ø Support several work modes
Ø Convenient configuration and maintenance interface (WEB or CLI)
High-performance
Ø Support multiple WAN access methods, including Static IP, DHCP, L2TP, PPTP, PPPOE, 3G/HSPA/4G。
Ø Support link backup between Cellular network and WAN
Ø Support VPN client (PPTP/L2TP/IPSEC/GRE, IKEV1/IKEV2))
Ø Support local and remote firmware upgrade，import and export configure file
Ø Support NTP Client
Ø Support MAC Address clone
Ø WIFI support 802.11b/g/n， support WIFI AP/AP Client（Optional）
Ø WIFI support WPA/WPA2 encryption，Support MAC address filter。
Ø support APN/VPDN
Ø Support DHCP Server and DHCP Client，DHCP static IP address，DDNS, firewall，NAT，DMZ host.
Ø Support TCP/IP, UDP, FTP (Optional) HTTP, POP3, QICQ, TELNET, FTP, SNMP, SSHD, etc (Optional)
Cellular Specification
|
Item |
Content |
|
Module |
Industrial cellular module |
|
Standard |
2G GSM/GPRS/EDGE, 3G WCDMA HSDPA/HSUPA/HSPA/HSPA+/DC-HSPA+ GSM/GPRS/EDGE, 3G TD-SCDM/TD-HSDPA/TD-HSUPA 4G FDD LTE 4G TD-LTE |
|
Band |
UMTS/HSPA/HSUPA/HSPA/HSPA+/DC-HSPA+(WCDMA/FDD) 1800/1900/2100Mhz |
|
GSM 850/900/1800/1900Mhz |
|
|
TD-SCDMA/TD-HSDPA/TD-HSUPA 2010~2025MHz/1880~1920MHz； |
|
|
FDD LTE: Band 1--2100Mhz Band 3--1800Mhz Band 5--850Mhz Band 7--2600MHz Band 8--900Mhz Band 20--DD800Mhz
4G TDD LTE (TD-LTE): Band 41 – 2500/2600Mhz Band 40 -- 2300Mhz Band 39 – 1900Mhz Band 38 -- 2600Mhz |
|
|
Network Speed
|
LTE : Down link 100Mbps, up link50Mbps |
|
DC-HSPA+： Down link: 42Mbps； up link: 5.76Mbps |
|
|
HSPA+(H)： Down link: 21Mbpsoptional up link: 5.76Mbps |
|
|
HSPA+(L)： Down link: 14.4Mbpsoptional up link: 5.76Mbps |
|
|
HSUPA/HSPA: Down link: 7.2Mbps； up link: 5.76Mbps |
|
|
HSDPA: Down link: 7.2 Mbps； up link: 384k bps |
|
|
WCDMA/UMTS: up link/Down link: 384 kbps |
|
|
GPRS: Down link: 85.6 kbps； up link: 42.8 kbps |
|
|
3G TD-SCDMA: Down link: 2.8Mbps， Up link: 2.2Mbps |
|
|
<24dBm |
|
|
Tx power |
<-109dBm |
|
Rx sensitivity |
|
WIFI Specification
|
Item |
Content |
|
Standard |
IEEE802.11b/g/n |
|
Bandwidth |
IEEE802.11b/g:54Mbps(max) IEEE802.11n : 300Mbps(max) |
|
Security |
WPA/WPA2 |
|
Tx power |
15dBm |
|
Rx sensitivity |
<-72dBm@54Mbps |
Hardware System
|
Item |
Content |
|
CPU |
Industrial 32bits CPU |
|
FLASH |
64Mbit |
|
SDRAM/DDR |
DDR2 512Mbit |
Interface type
|
Item |
Content |
|
WAN |
1 10/100M WAN port(RJ45)，Auto MDI/MDIX，1.5KV magnetic isolation protection |
|
LAN |
4 10/100M LAN port(RJ45)，Auto MDI/MDIX，1.5KV magnetic isolation protection |
|
Serial |
1 RS232 Port，15KV ESD protection Data bits：5、6、7、8 Stop bits：1、2 Parity：none, even, odd, space, mark Baud rate：2400~115200bit/s |
|
Antenna |
Cellular: 2 Standard SMA female interface, 50 ohm WIFI: 2 Standard SMA female interface, 50 ohm |
|
Indicator |
SYS x 1 CELL x 1 VPN x 1 SIGNAL x 1 WIFI x 1 LAN x 4 WAN x 1 |
|
SIM/UIM |
Standard 3V/1.8V user card interface, 15KV ESD protection |
|
Power |
Standard DC jack，reverse-voltage and over voltage protection |
|
RESET |
Restore the router to its original factory default settings |
|
TF Card |
1 Standard TF card interface |
Power supply
|
Item |
Content |
|
Standard Power |
DC 12V/2A |
|
Power range |
DC 12~30V |
|
Consumption |
<450mA(12V) |
Physical Characteristics
|
Item |
Content |
|
Housing |
Iron，providing IP30 protection。 |
|
Dimensions |
183x88.5x27mm |
|
Weight |
800g |
Environmental Limits
|
Item |
Content |
|
Operating Temperature |
-30~+80ºC |
|
Storage Temperature |
-40~+85ºC |
|
Operating Humidity |
95%（unfreezing） |